X Kernel Project Download For Redmi 7/Y3 Android 10/11

X Kernel Project Redmi 7 Onclite

X Kernel Project has been launched for Redmi 7 and this project is very good and you can do gaming very easily inside it

X Kernel Project Download For Redmi 7/Y3 Android 10/11

If you guys use Redmi 7, then all of you will know that a lot of kernels have been launched inside the market for your device and that kernels are quite good

X kernel project has been launched a few days ago for Redmi 7 and this kernel is very good, inside it you all get to see many features and your experience is also very good

About This Article

Hello everyone, how are you all, I am Aniket and in today's article, I am going to tell you all about the X Kernel Project

In which article I am going to tell you all if you people are thinking of using X kernel project inside your device, then you have to first read this article completely & I will tell you all about all the features of this and if you like their features then you can install it too

Now let's quickly know about some of its features and here I will also tell you how you can install it

X Kernel Project Features

These are some of its features that you all will like very much

Changelogs -

• mdss: rotator: Use FIFO kthread for rotator work
• kgsl: Increase priority of RT thread
• mdss: Update RT priority
• mdss: rotator: Adapt kthread work queue for 4.9
• mdss: Do not wait for kickoff in-display commit
• msm: mdss: improve performance coming out of idle pc
• msm: mdss: fix fence timeout for 2 buff cases
• msm: mdss: Power on display asynchronously as early as possible
• scsi: ufs: disable clock scaling
• boeffla_wl_blocker: Block qcom_rx_wakelock
• boeffla_wl_blocker: Block default wake-locks we had before
• arm64: strcmp: Align to cache and preload
• arm64: Import optimized strrchr from newlib
• arm64: Use optimized memcmp
• selinux: don't require auditing
• selinux: Allow audit to be disabled
• selinux: avc: omit audit callbacks if disabled
• sched/fair: Reduce latency
• lib/int_sqrt: optimize small argument
• tick/nohz: Optimize nohz idle enter
• string: Use faster alternatives when constant arguments are used
• UPSTREAM: dm-crypt: use WQ_HIGHPRI for the IO and crypt work queues
• mdss: mdp3: Optimize power save in lp mode
• cpufreq: cpu-boost: don't boost if input_boost_ms is <= 0
• arm64: libs: import enchanted strncmp
• arm64: copy_page: use prefetching
• arm64: lib: update strlen function
• arm64: lib: memcmp: improve medium-large sizes
• arm64: make default ARM64_DMA_IOMMU_ALIGNMENT as 9
• slub: Optimized SLUB Memory Allocator
• Silences WLAN, PCIe, and CPU suspend state kernel messages
• blk: disable IO_STAT completely
• sched/fair: Disable LB_BIAS by default
• fs: default to noatime
• trace: explicitly remove trace_printk allocation
• devfreq: memlat: Add suspend/resume for mem_latency
• mm: Keep dirty pages in ram for at least 120 seconds
• mm: Compact memory mostly when fragmentation occurs
• block: Reduce queue depth
• binfmt_elf.c: use get_random_int() to fix entropy depleting
• CHROMIUM: selinux: Do not log "permissive" denials
• net/sch_generic: Shut up noise
• diag: disable DIAG_DEBUG
• pwm: core: Shut up
• net: cnss_pci: turn off senseless logs
• pci: bye log spam
• pci: stfu this senseless dmesg spam
• pci: msm: shut down this needless logging
• usb: dwc3: Fix OF memory leak in probe
• irqchip: Silence log spam
• sched/core: nr_migrate = 128 increases number of tasks to iterate in a single balance run
• crypto: aes-generic - build with -Os on gcc-7+
• irq: spurious: Disable IRQ debugging by default
• profiling: Implement a simple task exit notifier when disabled
• memory_state_time: Remove dependency on profiling support
• uid_sys_stats: Remove dependency on the profiling subsystem
• tree wide: disable configurable debug mask logging by default
• usb_bam: disable event log by default
• net: rmnet_data: disable logging
• msm: msm_bus: Kill transaction logging functionality
• printk: silence TEE logs from userspace
• printk: silence health messages from userspace
• drm/msm/sde: Omit debug logging code
• power: main: silence logger
• drivers/base/power/main.c: Silence spammy logger
• msm_bus: remove tracer
• sched_clock: shut. up.
• dmaengine: fix memleak
• clk: qcom: clk-cpu-osm: Reduce CPU frequency update rate limit to 500 us
• drm/msm/sde: Cache register values when performing clock control
• kgsl/adreno: Properly set GPU timeout
• drivers/gpu: set gpu idle-timeout to 64s
• Agile-SD: TCP congestion controller
• tcp_agilesd: Apply 756ee17 ("tcp: replace cnt & rtt with struct in pkts_acked()")
• power: Improve stability
• cpufreq: Kill userspace CPU boosting entirely
• msm: kgsl: run kgsl-work queue as a high prio wq
• sched/nohz: Convert to hotplug state machine
• nohz: Add hrtimer sanity check
• nohz: Fix collision between tick and other hr timers, again
• nohz: Reset next_tick cache even when the timer has no regs
• nohz: Fix buggy tick delay on IRQ storms
• nohz: Fix spurious warning when hr timer and clock event get out of sync
• nohz: Move idle balancer registration to the idle path
• sched/idle: Move quiet_vmstate() into the NOHZ code
• timers/nohz: fix compilation
• block: Do not collect I/O statistics
• block: Disable preemption during IPI consideration
• block: Do not wake the request CPU if idle
• soc: qcom: watchdog_v2: Fix memory leaks when memory_dump_v2 isn't built
• blkdev.h:Fix compile errors
• sched: Enable NEXT_BUDDY for better cache locality
• sched: Disable ARCH_POWER
• sched: Turn on the TTWU_QUEUE feature
• kernel: time: reduce ntp wakeups
• zram: try to avoid worst-case scenario on the same element pages
• drivers: cpu-boost: A set initial boost to 0ms
• sched/fair: kick nohz idle balance for misfit task
• sched: fair: Misc changes
• sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices
• devfreq: simple_ondemand: Adjust tables for Q
• drivers: char: Add srandom
• procfs: add seq_put_hex_ll to speed up /proc/pid/maps
• procfs: optimize seq_pad() to speed up /proc/pid/maps
• proc: get rid of task lock/unlock pair to read umask for the "status" file
• proc: move /proc/SysV IPC creation to where it belongs
• fs/proc: use __ro_after_init
• The patch expands accounting to the PUD level.
• mm: account pud page tables
• proc: replace seq_printf on seq_putc to speed up /proc/pid/smaps
• proc: optimize single-symbol delimiters to spead up seq_put_decimal_ull
• proc: replace seq_printf by seq_put_smth to speed up /proc/pid/status
• proc: check permissions earlier for /proc/•/wchan
• proc: use set_puts() at /proc/•/wchan
• fs/proc/proc_sysctl.c: remove redundant link check in proc_sys_link_fill_cache()
• proc: fix /proc/•/map_files lookup some more
• proc: faster /proc/cmdline
• proc: do mmput ASAP for /proc/•/map_files
• proc: reject "." and ".." as filenames

Features -

CPU Governor -

• Conservative
• On-demand
• Userspace
• Powersave
• Energy DCFC
• Blu Schedule
• Pixel Smurfutil
• Smurfutil Flex
• Smurfutil
• Electroutil
• Helix Schedule
• Pixutil
• Performance
• Schedule

I/O Scheduler -

• Noop
• CFQ
• Maple
• Anxiety
• Tripndroid
• BFQ
• Zen
• Fiops
• Sio

Display Control

• KCAL
• K-Lapse 5.0

Compression Algorithm

• LZO
• LZ4
• Deflate
• LZ4HC
• 842
• ZSTD

File Sytems

• EXT2
• EXT3
• EXT4
• FAT16/32
• exFAT
• F2FS
• NTFS

TCP Algorithm

• bbr
• reno
• bic
• cdg
• cubic
• dctcp
• Westwood
• hybla
• htcp
• vegas
• nv
• lp

Available Menu

• Fsync toggle
• Dynamic Fsync toggle
• Fast charging toggle
• CRC Toggle
• Core Control
• Sound Control
• Voltage Control
• CPUs Set & Stune Boost
• GPU Boost (in GPU control)
• CPU Input Boost
• Adreno Idler
• CAF CPU Boost (Update: 2021-07-07)

Misc

• Ainur DTS software driver
• vDSO32 and vDSO64
• BPF JIT
• Auto Cut Charging
• WireGuard driver
• Fingerprint Boost driver
• Fandom RNG driver
• USB HID driver
• State Notifier
• Energy Model
• Boeffla WL Blocker driver
• Power Suspend driver
• DevFreq Boost driver
• sRandom driver (Update: 2021-07-07)

X Kernel Project Installation

If you are thinking of installing the X Kernel Project on your Redmi 7, then you have to follow the steps given to me so that you can install the kernel properly inside your device

• First of all, you have to turn off your device and save the file which I provided to all of you inside your device
• Now press and hold both Volume + & Power buttons simultaneously and move your device into recovery mode
• In recovery, you will all get to see the option of install, click on simply install and flash the file which I provided to you
• Reboot your device after being successful
• Done

Notes:

Recommended to wipe cache and Dalvik-cache after installing kernel

X Kernel Project For Redmi 7/Y3 Onclite Download

X Kernel Project // Android 10 & 11